SM Fiber Coupled Red Diode Laser
Single mode fiber coupled red diode laser module has high power stability, output power 0~Max can be continuously adjusted, and the original imported single-mode fiber is used. The fiber is designed with steel mesh inside, which is not easy to damage, with high coupling efficiency and convenient operation;
The 685nm single mode fiber coupled red semiconductor laser adopts an original imported pump source; 635nm 650nm and 660nm single mode fiber coupled red diode lasers use imported laser diodes (LDs) with original packaging.
Features
Reliable working performance
Long laser life
Can work continuously for long periods of time
The power supply comes with an overheating and current limiting protection circuit (with a fuse)
TEC and laser head fan cooling
External signal generator can be used for high-speed modulation (TTL modulation and analog modulation)
Applications
Fluorescence excitation
spectral analysis
Cellular tumor irradiation
Medical analysis
Experimental requirements for optoelectronic detection and other equipment
Parameters
685nm SM Fiber Coupled Red Diode Laser
| 660nm SM Fiber Coupled Red Diode Laser
| 650nm SM Fiber Coupled Red Diode Laser
| 635nm SM Fiber Coupled Red Diode Laser
| |
Wavelength (nm) | 685±5 | 660±5 | 650±5 | 635±5 |
Spectral Line Width (nm) | <3 | |||
Output Power (mW) | 1~25（0~MaxAdjustable power） | 1~80（0~MaxAdjustable power） | ||
Operating Mode | CW | |||
Transverse Mode | TEM00 | |||
Fiber Core Diameter (um) | 4~6 | |||
Numerical Aperture | 0.12 | |||
Length of Fiber(cm) | 50，100，200 etc（optional） | |||
Fiber Connector | FC/PC，FC/APC（optional） | |||
Power Stability (RMS, over 4 hours) | <2%，<3%（optional） | |||
Cooling System | TEC | |||
Power Supply | 90~240VAC@50Hz | |||
Modulating Repetition | 100KHz TTL / 10KHz Analogue | |||
Warm-up Time (minutes) | <5 | |||
Operation Temperature (℃) | 0~40 | |||
Expected Lifetime (hours) | >10000 | |||
Product size
